Anthropologie Leather Lasse Chair Knock-Off [DIY]

 Anthropologie is kinda the bomb. I have an unnatural obsession with browsing through their furniture. When I came across this particular chair, I fell in love! The green leather and the midcentury modern lines made my heart sing.

I stopped by my local Habitat for Humanity Restore to pick up a chair with similar lines to the original. See it tucked in at the beginning of the second row? Potential! Ugly beyond belief, but potential..

My store always has a large selection of chairs, and I picked this one up for just $2.

I took the chair from dumpster worthy, to living room ready with the help of a jigsaw, drill, and electric sander. First off, I had to change the shape of the frame. After removing both of the cushions, I tackled the legs.

First, I chopped off the part connecting the front and back legs that ran along the floor.

I also used a jigsaw to taper them.

After some quality time with my sander, the legs were completely transformed!

The back of the chair was rounded, and I needed it to be straight across. Once again to the jigsaw. The curve was cut off of the back and screwed into the front to square off that side as well. 

Last step: arms. Screw on a simple 1x4 and voila!

After that, it was ready to be upholstered. I stopped by my favorite fabric store to pick up materials. I actually did a post just on that store! Fabric for miles, people. Check it out. It's amazing.

I matched the green leather, and found black and white 

chevron fabric for the cushions.

So, once the frame was done, I covered it with batting and was ready to upholster.

Then the upholstering began. This being the second chair I've ever upholstered, I am not going to do a tutorial. I really had no clue what I was doing.

With the price of fabric and foam coming out to $82, the total was $98! That total includes $2 for the chair, $12 for upholstery tacks, and a $2 board that was used on the arms! A far cry from the original, which rings in at nearly $1,500!

♥

How did I do it? {Altering a chair frame!}

Two days ago, I revealed my Anthropologie-Inspired Chair overhaul! 

{You can see the post here}

 From This:                                 To this:

So, how did I do it?

Honestly? I have no clue.

That being said, this is definitely not a tutorial. 

The first thing I attempted to do was change the arms. 

Looking at my inspiration (The Anthropologie Astrid Chair), it is obvious that the arms do not slope upwards, as the original chair's arms did.

 So, I simply cut them off! 

Next, I cut off the back of the frame, and added tubes on the arms to make them round.

The arms are actually made from mailing tubes.
I didn't take a picture in between these two, but under the tubes, I put in the original arms for more strength.

I wanted the front legs to look more like those of the Astrid Collection.

Searching through my garage, I found the perfect solution: The legs of an old table. 

I then cut out the center section and added some old little wheels that I found in my garage!

Problem solved!

Next up was the back of the seat.

This was relatively simple. I cut a thick piece of plastic in the shape of the chair back. 

This was stapled to the top of the original chair back, and some 2x2s. 

Next I took some thin boards and covered the sides and back.

(And broke out the duck tape...)

Voila! New frame nearly complete!

After adding foam to the back, I simply covered the entire chair with two layers of quilt batting.

The chair was completed by painting the legs with a coat of gold paint, and finishing off the upholstery. 

 Tada!

 Chair reveal found here!

Thanks for reading! All comments are loved and appreciated! 

Anthropologie Astrid Chair inspired makeover!

[Update: How did I do it? See the process of altering a chair frame here!]

In my previous post, I mentioned how you can find a typical cane chair in nearly every thrift store and DIY blogger's home.

Source: The Robin's Nest

That being said, I wanted to make my own cane chair very unique.
I also wanted to show more possibilities with a very common item. 

It all started with this picture that I came across while browsing Anthropologie.com 

It's so cute!! 

Source: Anthropologie 

Upon further searching, I found out that Anthropologie sells a matching chair!

It. was. perfect.

Funky, whimsical, crazy, adorable.

That is when the light-bulb lit up. 

The idea was brought to the next level after I stumbled upon the perfect fabric at my local thrift store.
It is the exact color of the Astrid settee that originally stole my heart (cheesy, I know...).

At the low price of $3, I couldn't pass the fabric up. 

I then took inspiration from the Astrid collection, and created my own masterpiece.

*******************************************

Before.

After.

My Favorite part:

The tufting 

(My cat approved... and felt like posing for a picture)

Individual Costs:
$3-Fabric
$10-Batting
$8-Original Chair
$0-Everything else!
Total Cost:

$- 21

Compared to:
$-1,598.00
on Anthropologie.com

:)

"The frame of your chair should never limit your creativity"
(Sorry for all the cheese)

Please hop on over to East Coast Creative and click on my project in the linksy!

How did I do it? [See the process of altering a chair frame here!]

Thanks for viewing! Comments are always appreciated!